One-to-one relationship between low latitude whistlers and conjugate source lightning discharges and their propagation characteristics

One-to-one relation with its causative lightning discharges and propagation features of night-time whistlers recorded at low-latitude station, Allahabad (geomag. lat. 16.05°N, L = 1.08), India, from continuous observations made during 1–7 April, 2011 have been studied. The whistler observations were made using the Automatic Whistler Detector (AWD) system and AWESOME VLF receiver. The causative lightning strikes of whistlers were checked in data provided by World-Wide Lightning Location Network (WWLLN). A total of 32 whistlers were observed out of which 23 were correlated with their causative lightnings in and around the conjugate location (geom. lat. 9.87°S) of Allahabad. A multi-flash whistler is also observed on 1 April with dispersions 15.3, 17.5 and 13.6 s^1/2. About 70% (23 out of 32) whistlers were correlated with the WWLLN detected causative lightnings in the conjugate region which supports the ducted mode of propagation at low latitude. The multi-flash and short whistlers also propagated most likely in the ducted mode to this station.     

卫星射频接收机电磁兼容防护设计方法

射频接收机是卫星测控、导航、有效载荷等分系统的重要组成设备,也是对电磁干扰最为敏感的设备,在对卫星进行电磁兼容性（EMC）设计时,必须充分考虑射频接收机的EMC防护,以保证其在卫星电测、发射和在轨运行时能够在其所处电磁环境中正常工作.文章描述了卫星射频接收机典型的EMC防护设计方法,从屏蔽、电磁泄露防护和天线耦合防护等方面进行了阐述.     

Microstructural characterization and mechanical behavior analysis of 7075-T6 aluminum subjected to simulated lightning strikes

Aircrafts damages caused by lightning strikes have been known since the early days of aviation. However, the physical effects on the aircraft structure are still being investigated. This work seeks to evaluate the lightning strike effects in the aluminum alloy 7075-T6. Samples were submitted to lightning strike simulation in laboratory and the damages evaluated through characterization techniques. Ultrasound and profilometry tests have shown material loss to 0.272 mm depth in the damaged region. In addition, it was detected the material accumulation occurrence in the damage vicinity of the region. Below the damage, it was found a region where metallurgical changes were identified. The tensile and microhardness tests results have shown reduction in the percentage elongation and hardness increasing in the material affected by lightning. These results are corroborated by the X-Ray Diffraction (XRD) and Rietveld Method (red line) that indicated an increasing in dislocation density and micro-deformation in the material matrix. Optical microscopy results have shown the presence of microcracks on the normal and cross-section surface of the samples damaged. The Energy Dispersive X-Ray Spectroscopy (EDXS) and Electron Backscattered Diffraction Test (EBSD) found coarse intermetallic phases and precipitates compounds with dimensions greater than 1 μm in length. They were responsible for nucleation of the microcracks that propagate along the material grain boundaries.     

航天器分离面物理嵌合机理及防护方案

在某航天器研制过程中,发现了分离面镀膜后因非冷焊因素导致不能分离的现象。为探究该现象的产生机理、影响因素和防护方案,将铝合金试片表面分别进行不处理、本色阳极氧化处理、涂覆二硫化钼处理、光亮镀金处理和光亮阳极氧化处理后,两两配合加压,高真空条件下静置一段时间后,在常温常压条件下进行分离试验,如果试片未分离,重新采用新试片在变温常压条件下静置一段时间后,进行分离试验,分析各试片表面形貌变化和元素转移等情况。试验发现未分离试片因对接面上存在大量细小的凹凸纹路彼此机械咬合引起不能分离,试片镀膜硬度和表面粗糙度是产生物理嵌合的直接原因。从而,提出了航天器无相对运动的分离面需选用硬度较大、粗糙程度较低镀层的防护措施,并通过试验进行了验证。     

Electromagnetic waves observed by Venus Express at periapsis: Detection and analysis techniques

The magnetometer on Venus Express was designed to be able to obtain 128 Hz samples of the magnetic field from two sensors in a gradiometer configuration. This mode is used around periapsis to determine whether the signals reported at low altitudes near 100 Hz, had the properties of electromagnetic waves generated by electric discharges in the Venus atmosphere. The lack of a magnetic cleanliness program and the shortness of the magnetometer boom make this a challenging measurement. Fortunately the signals are sufficiently strong that they can be easily resolved with rather straightforward analysis techniques.     

论妇女平等就业权的法律保护

妇女平等就业权的保护是妇女劳动权益保护的一个重要方面,分析我国妇女平等就业权保护现状,提出如何加强对我国保障妇女平等就业权的法律保护,对保障妇女的劳动权益,推动我国社会和谐发展具有重要意义。     

A lightning swept stroke model: A valuable tool to investigate the lightning strike to aircraft

In the context of lightning strike on the Dassault Falcon family of aircraft, the standard zoning of Falcon 50, 900 and 2000, inferred from FAA and EUROCAE WG31 documents [US Department of Transportation, Federal Aviation Administration, Advisory Circular AC 20-53A, 1985; US Department of Transportation, Federal Aviation Administration, Advisory Circular AC 20-53B, Draft, 1991; EUROCAE WG 31, Aircraft Lightning Zoning Standard, ED-91, 1998], has been presented. Zoning proves to be quite similar between the three types of aircraft. Thanks to the feed-back on lightning strikes to Falcon, lightning traces have been observed on the fuselage for different flight conditions and aircraft. Observations are compared with the zoning performed by Dassault. A physical model, developed by ONERA, was used to simulate the sweeping of lightning on the fuselage of a Falcon 900. The results are in good agreement with the lightning traces observed on the fuselages.     

碳纤维复合材料基体改性/铜网组合雷击防护性能的研究

传统碳纤维复合材料（CFRP）树脂基体导电性差易遭受雷击损伤,本文使用石墨烯-镀镍碳纤维粉作为导电填料,对树脂基体进行电导率改性,并在表面铺设铜网,进行模拟雷电流冲击试验,检验基体改性/铜网组合雷击防护效果。试验结果表明,树脂基体改性后CFRP层压板在0°、90°纤维方向及厚度方向电导率分别为1.1571×10⁴、1.0871×10⁴、204.2 S/m,分别提高1.54倍、1.16倍、433.47倍。200 kA模拟雷电流A波冲击下,无防护试件雷击附着后明火燃烧,次生效应持续,而单一铜网防护和组合防护则能抑制次生效应;无防护表面最大损伤直径14.62 cm,此能量下铜网被击穿,单一铜网防护表面最大损伤直径19.05 cm,而组合防护表面最大损伤直径8.93 cm,下降53.12%;相比无防护试件,单一铜网和组合防护内部损伤面积分别下降66.2%和96.7%。单一铜网击穿后,树脂烧蚀后产生汽化反冲,增大损伤铜网脱落面积;组合防护铜网击穿后,改性树脂迅速导走电流,减小铜网脱落和内部烧蚀面积。     

基于ANSYS Workbench鸟撞飞机风挡有限元分析

利用ANSYS Workbench三维有限元软件,建立了鸟撞飞机风挡的力学分析模型,形成了一套完整合理的鸟撞飞机动态响应分析方法。其中,对模型建立和约束施加等提出了简便的处理方法,并且进行了比较详细的描述。通过有限元分析模拟计算鸟撞飞机前风挡的动态响应,得出了风挡的应力、位移及其分布规律,并与试验结果进行比较,两者吻合较好,可为新型风挡结构设计提供参考。     

现代民机新型灭火剂性能研究

对新型灭火剂研究背景和种类进行了简要介绍,对具有开发潜力的新型灭火剂的理化性能、毒性、腐蚀性、灭火性能、环保性能进行深入分析与研究。通过对新型灭火剂性能的研究,得出每种灭火剂的优缺点,筛选出适用于现代民机灭火系统的灭火剂。